Skip to content
Iraq: +964 776 260 0500Dubai Office: +971 58 846 5577Marketing@alnabrasalaali.com
AL NABRAS AL AALI CO.Oilfield Chemicals & Equipment Supply
HomeCement & Cementing AdditivesOil Well Cement — Class G
2.01Cement & Cementing Additives

Oil Well Cement — Class G

API Specification 10A / ISO 10426-1 — high sulphate-resistant (HSR) grade

For primary and remedial well cementing across a wide range of downhole conditions; HSR grade suited to sulphate-bearing formations.

FormPowder
StandardAPI Spec 10A
Packaging1 MT / 1.5 MT big bag (FIBC)
Oil Well Cement — Class G

Specification

PropertyAcceptance criteria
StandardAPI 10A / ISO 10426-1 — Class G, HSR
AppearanceGray powder
Chemical Requirements
MgO, %≤ 6.0
SO₃, %≤ 3.0
Loss on ignition, %≤ 3.0
Insoluble residue, %≤ 0.75
Total alkali (Na₂O eq.), %≤ 0.75
C₃S, %48 – 65
C₃A, %≤ 3.0
2 C₃A + C₄AF, %≤ 24
Physical Requirements
Fineness (Blaine), m²/kg≥ 280 (typical)
Free fluid, %≤ 5.9
Performance Requirements
Compressive strength @ 8 h / 38 °C≥ 2.1 MPa (≥ 300 psi)
Compressive strength @ 8 h / 60 °C≥ 10.3 MPa (≥ 1500 psi)
Thickening time @ Schedule 5g, min90 – 120
Max consistency 15 – 30 min, Bc≤ 30

Packaging & storage

1 MT / 1.5 MT big bag (FIBC); 50 kg bag on request. Store in a dry, closed, well-ventilated place away from moisture, rain and sunlight, on wooden bases at least 12 cm above a clean floor. Recommended storage up to 3 months; re-test to API 10A before use if stored longer.

Supplied with

TDSTechnical Data Sheet
SDSSafety Data Sheet
COABatch Certificate of Analysis
Al Nabras Al Aali Co. · www.alnabrasalaali.com · Marketing@alnabrasalaali.com · info@alnabrasalaali.com · +964 776 260 0500 · +971 58 846 5577
Esc
↑ ↓Enter/ · Ctrl K

Product comparison