Soda Ash
Mildly alkaline inorganic salt supplied as a white crystalline powder, light grade. In water-based drilling fluids it is the standard treatment for calcium contamination: it precipitates soluble calcium from make-up water, gypsum or anhydrite stringers and cement as insoluble calcium carbonate, restoring the performance of bentonite and polymer additives, and gives moderate pH and alkalinity adjustment.

Specification
| Property | Acceptance criteria |
|---|---|
| Appearance | White crystalline powder / fine particles |
| Total alkali (as Na₂CO₃, wet basis), % | ≥ 98 |
| NaCl content, % | ≤ 0.7 |
| Matter insoluble in water, % | ≤ 0.15 |
| Particles passing 80 mesh (180 μm), % | ≤ 10 |
| Bulk density (light grade), g/cm³ | 0.47 – 0.59 |
Application & dosage
Typical drilling-fluid treatment 0.25 – 2 kg/m³ (0.1 – 0.7 lb/bbl); about 0.27 kg of soda ash precipitates the calcium from 1 kg of dissolved calcium sulphate. Pre-dissolve in water and add through the chemical barrel with agitation. Treat according to titration of the calcium content — over-treatment raises carbonate levels and can affect rheology.